This website only uses cookies that are necessary. However, be warned that embedded videos contain all the cookies and crap that comes along with them. If you do not want cookies: do not click on them. I agree, remove this message!

Rattlebrained

washboards, rhythm bones, drumming & the blues...

The design after I added more texture and some clouds.

DIY Kick Drum Graphics

| No comments.

A few years ago I wanted to put the logo of my band on my kick drum but wasn’t thrilled with the idea of painting it. After giving it some thought I wondered if using permanent markers would do the trick. It did for me, so after using the same resonant head for 3-4 years I decided it was time for a change and figured I could document the process. So here is how I added my band’s logo to the new skin. But first things first:
I can’t be held responsible if you try this and mess up your kick drum resonator !
Try and draw on an old discarded drum skin first, it will give you an idea on how easy – or not – drawing a whole design will be. For example, the silver ink doesn’t always flow that well, on my first try I ended up with a few splotches that I had to disguise. These where caused by my (stupidly) shaking the marker directly over the drum skin, trying to get a better ink flow…

Be warned that the graphics can look a bit shabby close up but if you get the contours sharp enough once you step back it’s fine.

What you need:

  • A kick drum resonator skin.
  • Permanent markers of the color of your choice.
  • A razor blade or cutter of some sort.
  • Access to a printer.
  • A file of the design you want to use.

Having already made the old resonator design this way I knew I wanted to use a silver permanent marker on a black drum skin, but I suspect (but haven’t tried) that you could just as well do a black – or colored if you know how to do that – design on a white drum skin.

The logo that my band uses is round and would have fitted perfectly on the drums skin. Unfortunately because I use a resonator with a hole in it I had to adjust the design to fit the surrounding space. I have a 18” kick and used 3 sheets of A4 sized paper (similar to a US letter size) to cover the surface. You may need 4 sheets or more to cover the skin of a larger sized kick drum.
In any case the design has to be printed at the exact size you want it to be so you probably want to use a photoshop like program to prepare the image. Keep in mind that you are making a stencil of your design and will be cutting out the parts that are to be drawn on the drum skin. So make sure you have a good idea of what you want before you start drawing, you can’t erase the permanent marker!
:P

Although I didn’t take as many images as I probably should of, hopefully the following images will explain the process better than I can write; don’t forget to read the captions.

After printing the design, I cut out the various parts that needed to be transferred.I used two sheets for the text and a third for the steam engine. You can see why here.Using the template I traced the out line of the text and filled it in with the silver felt pen.I used a black felt pen to hide the logo of the drum skin's brand.Deciding where to place the steam engine.Tracing the stream engine. As you can see I did not cut all the lines, just what I needed to be able to fill in after.The steam engine as it was traced.Filling in the steam engine with the silver feltpen.The design in it's first state.The design after I added more texture and some clouds.

Initially I hesitated between a copper and silver colored marker which I bought together at my local supermarket. The silver was better for filling in the surfaces but even so I also ended up buying a silver marker with a very thick tip to speed thing up.

As you can see I divided the design into three elements, printed each one on a sheet of paper and then cut them out with a cutter. The stencils just gave me the basic outlines so I had a printed example of the design alongside to view the details to be drawn freehand. For instance I wanted a “cracked” effect so I drew them in right away.

The steam engine had a lot of small details which were difficult to cut out so I ended up only cutting out the main details and drawing in the rest afterward. When that was finished I still felt the design lacked presence so I drew in a background of clouds and textures. I then used a cymbal to trace the circle that surrounds the design.

Has this changed the sound of the drum? Not that I can tell. I hope this will give you ideas for putting your own design on your kick drum. Don’t hesitate to comment if you have questions.

No comments.

    Comment

    Required *.
    textile help

    *